Pneuma-Seals can be configured to practically any shape or size. Our products can be supplied as continuous loops (Fig. 1), in strip form with sealed ends (Fig. 2), in "U" or similar shapes with preformed corners (Fig. 3).

Pneuma-Seals can be configured in endless configurations with preformed corners (Fig. 4), or complex configurations (Fig. 5). In many cases, a seal will conform to the corners or radii of a given installation without the necessity for preforming these corners or radii into the seal.

Minimum bend radius information for circular seals, or corners on rectangular seals, is available. When requesting this data, refer to the desired cross-sections (see pages 8 to 14) and the applicable plane of use as indicated (Fig.6). Arrows indicate direction of inflation.

Many of the seals can be supplied with no joints, if required.

Pawling’s unique facilities and processing techniques can produce seamless (no vulcanized joints) rubber products of virtually limitless length and size to your specifications (fabric-reinforced or non-reinforced).