• For Types 1 & 2 • For Type 3 • For Types 10A & 10B

End Configurations & Clamps for Types 10A and 10B Profiles

Types 10A and 10B seals are available with two different sealed end heights, low and high. The low ends are sealed at a height approximately 10% higher than the relaxed hollow profile and the high ends sealed at a height approximately 20% higher than the relaxed hollow profile.

Side View of Sealed End
Type 10A	H(mm)	LE(low end)	HE (high end)	L(solid)		Type 10B	H(mm)	LE(low end)	HE (high end)	L (solid)
PR15092 PRS945 PRS950 PRS960 PRS955 PRS952 PRS949 PRS966 PRS972 PR6119	.394 (10) .453 (11.5) .472 (12) .709 (18) .748 (19) .747 (19) .827 (21) .630 (16) 1.024( 26) 1.260 (32)	.433 (11) N/A .512 (13) .768 (19.5) .807 (20.5) .807 (20.5) .906 (23) N/A 1.142 (29) 1.378 (35)	.512 (13) N/A .591 (15) .847 (21.5) .866 (22.5) .925 (23.5) 1.024 (26) N/A 1.339 (34) 1.772 (45)	.551 (14) N/A .630 (16) .630 (16) .866 (22) 1.024 (26) 1.063 (27) N/A 1.378 (35) 1.378 (35)		PRS973 PRS977 PRS969 PRS970 PRS942	.197 (5) .315 (8) .787 (20) .945 (24) 1.575 (40)	.217 (5.5) N/A .847 (21.5) 1.024 (26) 1.654 (42)	.256 (6.5) N/A .945 (24) 1.142 (29) 1.890 (48)	.256 (6.5) N/A .787 (20) .827 (21) 2.126 (54)

Ends of strip seals should be securely clamped as illustrated below.

Fig 1.	Fig 2.	Fig 3.	Fig 4.

 

Home | Site Map

©2006 Pawling Corporation, Engineered Products Division
157 Charles Colman Blvd. Pawling, NY 12564-1193 USA

(845) 855-1000 | (800) 431-0101 | Fax: (845) 855-1139 USA
West Coast: (949) 475-9842 | Fax: (949) 475-9859

epdinfo@pawling.com

Site Development & Design: Greener Pastures Design & Illustration