Standard Profiles: Type 3
![]() |
These cross sections are designed specifically for a snap fit into a mating dovetail groove. The Type 3 convoluted design, along with the Type 4, also provides the greatest gap/width coverage when compared to other designs. |
| Type | Materials | B | H | Y* | Standard Air Connections | ||||||
| Reinforced | |||||||||||
| PRS599 PRS591 PR14575 PRS581 PRS594 PRS722 |
EP, VMQ |
5/8 11/16 7/8 7/8 1 3/4 3 |
1/2 1/2 1/2 5/8 1 7/32 2 1/8 |
3/8 7/16 7/16 1/2 1 7/32 2 |
2 2 2 2 3A 3A |
||||||
| *Maximum Gap | |||||||||||

| Type | Materials | B | H | Y* | Standard Air Connections | ||||||
| Reinforced | |||||||||||
| PRS592 PRS595 |
EP EP |
5/8 7/8 |
1/2 1/2 |
1/4 3/8 |
2 2 |
||||||
| *Maximum Gap | |||||||||||

| Type | Materials | B | H | Y* | Standard Air Connections | ||||||
| Reinforced | |||||||||||
| PRS598 PRS597 PRS708 |
EP, VMQ EP, VMQ EP, NBR |
11/16 7/8 1 3/4 |
17/32 1/2 1 15/32 |
3/32 1/4 5/8 |
1A, 1B, 11 1A, 1B, 5 1A, 1B, 4A, 4AB, 7 |
||||||
| *Maximum Gap | |||||||||||

| Type | Materials | B | H | Y* | Standard Air Connections | ||||||
| Non-Reinforced | |||||||||||
| PRS980 PRS902 PRS916 |
VMQ EP EP |
5/8 7/8 1 3/4 |
5/8 7/8 1 3/4 |
3/32 1/4 5/8 |
1A, 1B, 11 1A, 1B, 5 1A, 1B, 4A, 4AB, 7 |
||||||
| Type | Materials | B | H | Y* | Standard Air Connections | ||||||
| Reinforced | |||||||||||
| PRS709 | EP | 7/8 | 5/8 | 5/16 | 3A | ||||||
| *Maximum Gap | |||||||||||
| Type | Materials | B | H | Y* | Standard Air Connections | ||||||
| Non-Reinforced | |||||||||||
| PRS736 | EP | 5/8 | 1 1/4 | 5/8 | 1A, 1B | ||||||
| *Maximum Gap | |||||||||||
Inflatable Seals Home | Inflatable Seals Site Map
©2006 Pawling Corporation, Engineered
Products Division
157 Charles Colman Blvd. Pawling, NY 12564-1193 USA
(845) 855-1000 | (800) 431-0101 | Fax: (845) 855-1139 USA
West Coast: (949) 475-9842 | Fax: (949) 475-9859
epdinfo@pawling.com
Site Development & Design: Greener Pastures Design & Illustration