Special Configurations: Small
Diameters
When the OD or ID of the surface to
be sealed is too small for a standard Pneuma-Seal cross section, inflatable “bladders” are employed
(PR16376 and PR16436 below). This concept is generally used for seals less
than 2" in diameter, but may be used for seals up to 6" or
more in diameter. Typically, Pawling supplies the molded bladders and
the required
dimensions for the user supplied 3-piece housings, but on request, Pawling
will also furnish the housings.
Home | Site
Map
©2006 Pawling
Corporation, Engineered Products Division
157 Charles Colman Blvd. Pawling, NY 12564-1193 USA
(845) 855-1000 | (800) 431-0101 | Fax: (845) 855-1139 USA
West Coast: (949) 475-9842 | Fax: (949) 475-9859
epdinfo@pawling.com
Site Development & Design: Greener
Pastures Design & Illustration
