|
|||||||||||||||||
![]() |
|||||||||||||||||
|
|||||||||||||||||
![]() |
|||||||||||||||||
![]() |
|||||||||||||||||
![]() |
|||||||||||||||||
![]() |
|||||||||||||||||
Special Configurations: Sealing
Rectangular Openings
with
Radially Outward Expanding Seal
Since square right angle corners are not available
on radially expanding Pneuma-Seals, intermediate sealing pads are employed
between the radiused
seal and the square corners of the opening to be sealed.
![]() |
![]() |
|
| Fig. 1 | Fig. 2 |
These pads can be bonded to the seal (Fig. 1) or to the corners of the opening (Fig. 2). Where possible, Figure 2 is recommended in lieu of Figure 1.
©2006 Pawling
Corporation, Engineered Products Division
157 Charles Colman Blvd. Pawling, NY 12564-1193 USA
(845) 855-1000 | (800) 431-0101 | Fax: (845) 855-1139 USA
West Coast: (949) 475-9842 | Fax: (949) 475-9859
epdinfo@pawling.com
Site Development & Design: Greener Pastures Design & Illustration